Skip to main content

How to enable ipv6?

It’s my network config:

1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth1_0: <BROADCAST,MULTICAST,UP,10100> mtu 1500 qdisc qdrv_sch_red qlen 512
    link/ether f4:0e:83:08:d4:aa brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.100/24 brd 192.168.1.255 scope global eth1_0
3: br0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue 
    link/ether f4:0e:83:08:d4:aa brd ff:ff:ff:ff:ff:ff
    inet 208.126.34.56/23 brd 208.126.35.255 scope global br0
    inet6 fe80::f60e:83ff:fe08:d4aa/64 scope link 
       valid_lft forever preferred_lft forever
4: wifi0: <BROADCAST,MULTICAST,UP,10100> mtu 1500 qdisc qdrv_tx_sch qlen 1536
    link/ether f4:0e:83:08:d4:ab brd ff:ff:ff:ff:ff:ff

 

Please, help me, im try to do it last 3 days :(

P.S. Router network config

 

We understand that you would like to know about the IPV4 address in Arris VAP2500 but unfortunately, we do not support this device. Hence please check with you’re ISP for further troubleshooting.  

Terms & ConditionsCookie settings