+1Hi folks,
I just found Arris’ specifications for SB6190 signal levels here.
It says the Downstream Bonded Channels power should be between -15dBmV and +15dBmV. My power levels are at 11.X dBmV to 13.X dBmV. However, in the provided example, it shows -0.1dBmv to +0.2dBmv. So my question is this? Should my downstream power levels be between -0.15dBmV and +0.15dBmV or should it be between -15.0 dBmV and +15.0 dBmV? If it’s NOT the latter, then I should be calling Cox.
Best answer by SURFboard Moderator
Hello Lareman,
Thanks a lot for bringing this question to us. In this case, the right range will be between -15 to 15, meaning that having 11 to 13 will be within range.
Hope this answers your question, please let us know if this is the case.
Hello Lareman,
Thanks a lot for bringing this question to us. In this case, the right range will be between -15 to 15, meaning that having 11 to 13 will be within range.
Hope this answers your question, please let us know if this is the case.
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
