Can’t find the latest firmware version for my SurfBoard SB8200, which is in boot loop. Arris official support website for this product is empty, no links.
Solved
SurfBoard SB8200 Firmware upgrade
- The Many
Best answer by SURFboard Moderator
In this case we would suggest you to reach out to arris.com/consumersupport for further assistance.
This topic has been closed for comments
+41- Juggernaut
There isn’t any user changeable firmware on modem only devices. Its pushed by the ISP as part of the provisioning.
You can try disconnecting the coax from it and then holding reset for 7-15 seconds while powered on.
- The Many
I tried, then it stops the boot, lights #1 & #2 (blinking) on for a while… then I bring the coax back, then Internet is back… after 3-5 minutes it boots again.
- Wi-Fi Warriors
Firmware update are completely handled only by your internet service provider. Because Arris develops the software update and makes it available to service providers. The service providers qualify, test, and distribute the software update to devices on their network. It has limited control or visibility on distribution by the service providers.
+41- Juggernaut
When you’re in that 5 minute period with it blinking/working, try to log in and check the cable connections page (get a screen snip). Sometimes to high of a power can trigger a reboot
- The Many
Does not give me internet anymore. It reboots right away after first light. Then four lights, then off. Then on. I tried hard reset with pin several times, no coax. Still in reboot loop.
- Wi-Fi Warriors
In this case we would suggest you to reach out to arris.com/consumersupport for further assistance.
Login to the community
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.