I just had this activated last night and having some channel issues and only the downstream light is blue. The upstream light is green. Spectrum says they don’t see any problems. Is this normal?
Solved
Newly activated SB8200. Channel 24 is missing. 25 is not locked and 23 has 3127368446 Correctables
- The Many
- 2 replies
Best answer by plemans
Then you’d need to check with the ISP as there’s something going with the line.
This topic has been closed for comments
- The Many
- 2 replies
After bypassing the router and going straight to the pc, channel 24 appeared and is “Unlocked” at 0Hz, 25 is now “Locked” and channel 23 is still showing “Other” under “Modulation”. Weird stuff
+41- Juggernaut
- 2214 replies
usually indicates an issue with the line.
Start with removing any amplifiers, signal attenuators, or splitters from the coax.
From there check the line for kinks, damage, moisture in the line.
Check the connectors for improperly made ends, foil touching the copper coax line, loose connections, bad/old/cheap connectors, or corroded connections. Replace them if you do.
If you can, simply connect the modem right where the coax comes into the home. This prevents wiring in the home from being the issue. And some ISP’s charge if the wiring issue is in the home. So this helps prevent this.
- The Many
- 2 replies
No splitters, amps or attenuators. It’s hooked up directly where the cable comes in.
+41- Juggernaut
- 2214 replies
- Answer
Then you’d need to check with the ISP as there’s something going with the line.
Login to the community
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.