Basically, slow speed, intermittent connection or no internet access occurs usually out of cable signal level, out of acceptable range and it will be resolved after the power level are adjusted by the service provider. So for this we need to check the cable signal level to confirm what causing this issue to proceed further.
http://arris.force.com/consumers/articles/General_FAQs/G34-G36-Cable-Signal-Levels
Thank you so much for your insight and recommendation. I’m glad to hear this is not an equipment Warranty problem. I know from past experience that WiFi (and other) signaling issues can have many points of failure and without technical knowledge or the right equipment to analyze frequencies solutions are hard to achieve.
Since it seems you know something about this type technical environment I have one other question before attempting to engage with the Cable Provider. Do you know or can you explain why the problem I’m having with the 5GHz Channel does not also exist (or is not noticeable) on the 2.4Ghz Channel or via the Coax cable direct connects?
These two other channels currently have no drop off that I’ve noticed thus far. (Maybe its just a matter of time before a similar failure does occur.)
In any event, thank you again for your time and pointing me in the right direction to attempt to fix this issue. My next step will be with the cable provider and hopefully get someone that understands cable signal levels and the options to find a solution.
Cheers,
Larry G
It sounds like you're dealing with some slow Wi-Fi speed issues on both of the networks which is 2.4Ghz and 5Ghz (preferably more)
The trouble shooting steps that you had mentioned are a good starting to check on the least congested Wi-Fi channels.
Let's try doing a Factory Reset and also try on this following step after logging on the web manager page (192.168.0.1)
Please go to gateway select troubleshooting and click on restart/restore and then select restart Wi-Fi and router.
Also check the Firmware version by going to Software option on the gateway
If none of these steps resolve the issue, reaching out to arris.com/consumersupport would be a good next step.
They may be able to provide further assistance or recommend additional troubleshooting steps specific to your router
Also consider the below mentioned points:
- Check if the co-axial cable is proper and no crack or loose connection!
- Not to place any electromagnetic device near the modem
- Ensure the modem is kept on an open environment.
Note: Do check on the Speed plan that you are having with your (Internet Service Provider) and the Firmware Version
Thank you for your guidance. Having completed most the recommended steps during the weekend of March 29-30 the G36 continued to fail. ARRIS tech support is/was outstanding, but the equipment continued to not perform correctly. My solution was to return the ARRIS G36 and exchange it for a comparable Netgear product. Out of the box the Netgear performed as specified and continues to exceed my expectations for range and speed. End of story. End of ARRIS G36.