Wi-Fi Modems

I recently purchased a SBG10 Modem / Router.I set up an account at NoIPAfter configuring the DDNS to work with NoIP update service I see no way to confirm that it is working.How would this be done?

When trying to setup a Forwarded Port in the Router Gateway Application (login successful and all services functioning and identified), I choose connected device from the “Select a device to add IPv4 and IPv6 address” button… the fields are populated automatically by the Router program, and then I enter the port number in the start and end port boxes, then hit Save…An Alert popup box appears with “Please use only alphanumeric characters”.Even if I populate the boxes with manual keyboard entry, I receive the same result.I have tried to use the mobile phone web GUI version of the Router Gateway, and receive the same result as I have described above (using the Computer CPU to add the new Port Forward service.HELP?! 

 I get the message below on login screen:“The version of Chrome you are using is unsupported. Your Gateway's web interface has been tested to work with the minimum version: 70.0.3538.110.You may proceed with an unsupported version, but you might experience issues using the pages.” SBG8300 was bought 3 weeks ago at BestBuy..My Chrome version is:  “Chrome is up to dateVersion 103.0.5060.114 (Official Build) (64-bit)” WHY the silly message?   

Does the G36 have VPN client mode?I want all my traffic routed through a VPN installed on the G36 instead of setting it up on each device I use, is this possible? If not, are there any suggestions for accomplishing my goal? Thanks in advance.

  "Is this g34 compatible to the sgb6700-ac and will it support an m cell for phone usage?"

What is wrong here? Web Interface keeps asking me to upgrade the browser but I do have the last updates Current version Version 101.0.4951.41 (Official Build) (64-bit) Message Supported Browsers VersionsThe version of Chrome you are using is unsupported. Your Gateway's web interface has been tested to work with the minimum version: 70.0.3538.110.You may proceed with an unsupported version, but you might experience issues using the pages.

New SBG8300 connects perfectly to 2 cell phones, 2 laptops and 1 tablet, using the 5G SSID.  Canon printer detects  the 2.4G SSID as well as the 2.4G Guest SSID, but not the 5G SSID.  Please advise if there is a solution for this.ThanksSteve O

I talked to Xfinity about activating it, and gave them all the information they need to put it on their network.  The modem part seems easy peasy.But I don’t recall what WiFi network name and password I created years ago.  Is there a way to reset it to the factory settings?  I am out of warranty already so I can’t ask Arris Surfboard for help.

I have SBG8300  router from my ISP.  I generally login to their router page to enable wi-fi ( normally it is in disabled mode). By mistake I clicked  Bridge mode button though I don’t even know what the bridge mode is.  Now I can’t login to the http://192.168.100.1 at all.   The browser URL shows https://192.168.100.1/wizard_step1.php  and runs for ever.  How will I be able to login to router settings.  I appreciate any help. internet is working normally. But whatsapp message refresh is taking forever saying  “Wiating for this message. This may take  a while

WOW cable internet can't recognize my Surfboard SBG8300 in order to activate/connect.  They keep telling me they can't see it on their end.  I'm trying to quit renting their gateway so I know that my coax works fine since I just move it to the new Surfboard.  Please help.

How can I increase the speed of my wireless network?

I moved from one apartment to another one  At the old place i was using an SBG8300 which was working great.  The new place was set up with Xfinity equipment and I would like to continue using the SBG8300 but have no idea how to switch back to it.  Could someone please tell me how I can do this please? Thank you!!!

I have a Panoramic Wifi Gateway (Model: TG1682G).I’m wondering if it will damage the router if I unplug it regularly, when I go to work during the day and perhaps at night as well, to save electricity.Also, perhaps someone knows whether the process of booting up the router is very energy-intensive---perhaps to the point that it doesn’t make sense to unplug the router to save electricity.Thanks.

Hello Community I recently updated my speed from 200mbs to 1.2gb, but am not able to reach the gigabit speed, it is something wrong happening to my Arris?

Hello Community, I just recently purchase a G36, because i like to have the lastest hardware available from Arris, when i purchase the G36, i do notice that were another device called G34 that is basically identical, which is the main differences in between these two G-s devices? 

Hello guys, Wanted to ask if there is feature or possibility on my equipment to change the address to access the configurations of my SBG7400AC2, one friend of my provide me this recommendation to avoid some one else hack my router, Thanks in advance 

Will my device work with ax6600 tri-band mesh?

I have the SBG8300 and the surfboard central app, I want to setup some reserved IP address for some of my devices but I don’t see that option in the app. How do I reserve IP addresses for my 8300?

I recently switched my router, right now I'm working with the G34. I used to cast with my Google Chromecast with no issues but now that I changed my router, cast is not working. I haven't changed anything but my router. I also have a printer that is facing a similar issue but I'm not worried about that for the moment, I want a solution for my Chromecast 

Hello SB community! I know I can set up a wifi name and password to personalize my network, but I was wondering which features or settings will help to secure my home network. I know companies are implementing many security systems for example this new thing called private address and so on. I’m willing to read suggestions! 

I own an SBG8300 but recently bought a new router that provided better Wi-Fi coverage so I put it in bridge mode so I wouldn’t have two Wi-Fi signals broadcasting.  When I did that however, I noticed that the ethernet ports stopped working.  When I disabled bridge mode from the SBG8300 the ethernet ports started working again.  Does anyone know of a work around for this?

So, this just happened. My cat chewed my power cord and I need a quick solution because I’m working from home but I feel lost I do not how to select the proper power cord for my router, please help!

 It would be good to have knowledge base reference

I need help connecting my Epson printer to my network!

I’m looking to purchase your Wi-Fi modems.  How can I add Mesh System to it?