Wi-Fi Modems

I have a TP-Link TL-SG105-M2 unmanaged 2.5G switch connected to the 2.5G port of the Arris G36. Devices connected to the switch can access the internet just fine until they go to sleep. Upon waking up, the device will say it’s connected to a local network, but not the internet. Unplugging & replugging the switch resolves this.When a device is connected directly to the 2.5G port (no switch), it has no issues When the switch is connected to one of the Gigabit ports, it has no issues (besides the lower bandwidth) After setting my device to never fall asleep, it has maintained a connection for daysI’m using relatively new, short CAT6 cables for all scenarios. I believe the G36 is on factory defaults besides network name and password.

I am trying to log into my router manager. It's the default login. Username admin Password ?I've tried PasswordAdmin It's what Google said to use. Neither work. Any ideas on what the Password could be?

I am using  an Arris (Motorolla) Surfboard SBG6700-AC  Cable Modem with Xfinity (Comcast) Wired Ethernet Connection on an HP 8300 All-In-One PC .  I am using Ubuntu Linux Version 20.04 LTS.  My problem is I that I am unable to log into the Modem (192.168.0.1) with the Default user name and password combination(s),  (User Name: “admin”  Password: “password”) or the Alternate Combination of (User Name: “admin”   Password: Wi-Fi Security Key on Label on Bottom of Cable Modem).I am attempting to Reset the Wi-Fi Credentials on this Cable Modem so as to enable Wi-Fi Access to my other computer(s) and to my Android Cell Phone.In addition, my attempt to Complete a Factory Reset on this Arris Cable Modem was unsuccessful. Any Help or Guidance is greatly appreciated. Regards,imgeek

I need to check my G34 modem firmware any update?

New G36- streaming Hulu and video dropped 3 times, internet completely gone. Had to do a hard reset by unplugging modem twice. Then the third time I used to reset button. What is going on- spent over $300 for this piece of junk for it to be doing this? According to Xfinity the internet is fine. 

I bought a used 2470 gateway. I can connect wirelessly to the gateway using the default Network name and WiFi password on the label. I can bring up the admin login page using the default ISP. However, the default user name of “admin” and the default password of “password” or variations there of, are not working. I keep getting told, “ User name and/ or password are not correct”. I have reset the router (yes, using the little reset button) multiple times for 10 seconds,  30 seconds and multiple time in a row!! Nothing works!! Does anyone have any suggestions?? 

I subscribe to Fubo and recently we lost access to our locals and RSN, I can see the arris G34 modem thinks my Postal Code should be:{"postal":"06811"}Which is Danbury, Connecticut. I am 170 Miles north of Danbury.Fubo worked fine until last Friday, when my wife had to reboot to get the wifi back up, how did this Postal Code change and how do I change it to my Postal Code? Thank youDavid

I have the G34 model and I’m looking for a good/best Wi-Fi extender, thank you.

The SBG 10 spec says that I should have download speeds up to 686 MB per second, and Comcast says that my modem is an SBG1000 and incompatible with 75 MB per second. What's the deal? Is there a problem with Comcast or with my modem? I use a VPN. Does this create a problem?

I’ve had the G36 for about a month. Overnight the wifi networks and passwords reverted to the factory default without me doing anything. The admin log in did not revert to factory default. Has anyone experienced this before?

I now have AT&T fiber optic using their modem/router in my house. Previously I had Comcast cable and used my Arris SBG8300 for WiFi.  I have a Cat5 cable running from my house to my detached garage which I used in the past plugged into my Arris Model SBG8300 (house) when I had Comcast Cable. The Cat5 cable was plugged into a laptop I used in the garage. My question is, can I plug my Arris into the Cat 5 cable in my garage, connected to my AT&T Router/Modem (house) and use it for Wi-Fi for some remote security cameras in my garage? 

Can't access the admin login on Arris SB SBG7400. I was able to earlier in the day with the generic user name & the password I created & then later nothing. I tried resetting the unit, that didn’t work. I saw several other questions raised about this issue. I’m using Google Chrome.

ive gotten 2 new modems that on the box say are capable of 800mbps down however when i run a speed test with my PC and it being the only thing on the network, im barely getting 200 down. i pay for 800mbps so im trying to get at least 500-600 down. contacted XFinity and they say its a modem issue but i cant get ahold of an agent via live chat because the site cant find its own modem. bought it at best buy and i just have no clue what to do. any tips? 

Lost my manual awhile back and I need to know where to start to switch the GHz over, trying to install a camera doorbell..Thanks in advance

Keep getting "Can not get password for admin from backend!" Error when trying to log into G34 admin page. Password and username are correct, and have logged in using them multiple times in the prior weeks without issue. Power-cycling does nothing, restarting router through ISP didn't change anything. Any tips, tricks or helpful insight would be much appreciated.

HelloI have acquired used Arris VAP3400E devices which I am currently using to wirelessly connect IPTV STB device.I would like to know if there is a newer version of the firmware and where I can download it from?I managed to log in to the device and I can see that it currently has software version: 10.06.13

I have an Arris Surfboard SBG7400AC2 modem/router. Will this work with a TP-Link X20 Wi-Fi 6 system?

I’m looking at buying a ArrisG34 I see it’s compatible with cox cable but was wondering if I can connect it with just my iPad. I have no computer only iPad and iPhone. thanks, Eli

Hello I have a SBG8300 and the wifi 2.4GHz always have an issue to connect, the 5G work fine and have no issues. It either won't connect or the specific wifi name not appear at all. The modem always need to be turn on and off every several days. It started happening in the last couple months and just getting worst now since I just reset the power 2 days ago. Now it needs to be reset at least twice every week and it becomes stressful all my securities devices need to be reset  each time. Please help resolve this issue.

I have an old Toshiba with this chip:https://www.intel.com/content/www/us/en/products/sku/75439/intel-dual-band-wirelessac-7260/specifications.html It runs dual band and 802.11ac as you can see.I can't see the WiFi on the laptop: neither band shows up. I tried turning on secondary network and tried ALL encryption types and both bands, including Open access. No signal ever seen by laptop. I see them all on other devices, and no issues connecting. I see numerous other wifi networks in the area on the laptop and can connect no problem to other ones that are encrypted. Is this a compatibility problem that I don't understand?Arris chat has not yet been helpful.Thanks in advance.

I bought this following product in Amazon on December 23, 2022.  Since I connected this modem,  I am using 5g and 2.4G wireless as well as Wired connections.I receive intermittent internet interruptions,  Either I lose my internet or I get message on screen you are facing internet issues.  Don’t know how to connect it.  I verified channel bandwidth that is selected is 2.4 is on 20/40 and 5G is on 20/40/80 and dynamic channel selection disabled.Can any one please help,  why I am getting this issue with internet.  This is causing serious problems when I am on calls audio is dragged.  When I am watching TV I see Connection Problem message very often.Model I bought:  ARRIS Surfboard G34 DOCSIS 3.1 Gigabit Cable Modem & Wi-Fi 6 Router (AX3000) | Approved for Comast Xfinity, Cox, Spectrum & More | Four 1 Gbps Ports | 1 Gbps Max Internet Speeds | 2 Year WarrantySoftware Image Name:AR01.04.028.01.01_040121_724.NCS.20.X2

I just came back to Xfinity. Which model recommended for wifi modem w/router. Also I use VOIP for my landline.  I had an old Surfboard with two ports I plugged in my two vonage lines, one for voice the other fax. Will any of the surfboard models with model-router combo accept these inputs or does it have to be a voice model?Thank you.

Hello I just bought a sbg6700-ac brand new I did not realize ot was so outdated is there any way to update it or update the firmware is super slow and I'm paying for much higher speeds thanks. 

I guess my previous question/conversation was closedso I’ll reopen another one with more input (i am getting DMs from people asking me if this solved, it isn’t). Does any official person from Arris actually follows the messages or is this just the community? this was a reply to someone who DM’d me: I have NOT found a resolution to this.  I want it to work, especially since I'm past the return date. I have not reset to factory yet, because a simple reset/reboot of the router seems to fix it.  I had one stretch where it went 13 days without needing a reboot, but since that time it's back to reboot every 2-4 days.  I'm not a network engineer, but I still feel that this is an Arris issue, not Xfinity.  The G36 should be able to autocorrect itself, due to poor line conditions but doesn't.  Obviously I have no proof other than, when my system needs a reboot, I can s

How do I enable bridge mode on my arris sbg6900 in order to not use the router so I can set up google nest wifi?