Solved

Default password not working 

I just purchased this Arris Surfboard S34 modem from Amazon on September 28, 2024.  Before I connected the modem to the router, I logged into the modem using 192.168.0.1. Once in, I setup my username and password. After COX activated my modem, I connected my PC to the modem using the 2.5 Gbps Ethernet port.  Once my PC was connected to the Internet I can browse any website without any problems. However, there are two issues: 1 - the LED light on the 2.5 Gbps Ethernet port is blinking constantly, and the color is yellow.  2 - I tried to ping the modem using 192.168.0.1. The ping replies with: Request timed out.  Also, if I type the same IP address in any browser, I can’t access the modem. The message: This site can’t be reached.  Please advise.  Thank you.

Looking to migrate sbg10 out of service, but in the configuration, the router mode- can i use bridge?

I recently purchased a new surfboard SBG 10. It was set up with the default name and password. I would like to change that name and password to something I’m familiar with. Help.

i cant access the admin login. i used the default login after i reset the router and still cant get in. it does say im using an unsupported version of chrome but mine in is updated and because of that the browser is unsecure. I've tried adjusting every security setting and even downloading an older version of chrome but nothing has worked. i could use some help if anyone has any ideas

Is there a way to connect this SBG10 model with a hdmi connector to a flat screen tv?

Hello, As many other users I ran into a problem with intermittent packet loss. Arris sent a replacement - both G36 units have loss. 2xXfinity modems + 1x CODA56 - no loss. The issue is clearly with G36. Arris support is trying to blame Xfinity for incorrect signal levels and Xfinity is reasonably responding that their signal levels are good for other modems so Arris needs to fix it - and it doesn’t. So what can be done?Can I return that G36? Or can Arris fix that problem from their side? Thanks!

So I factory reset the router last night. Now the default password and user will not work that I found on the bottom of the router. Ive factory reset multiple times and still nothing. Tired doing the 30-30-30 method and I’ve even used the preshared key and still saying incorrect user or password.

S33 not working at all, done everything. Has a high pitched noise with solid orange light. Still under warranty but phone and chat support are not available when I check, what do I do? Thanks

WiFi says it is connected but it’s not working. Tried to connect the TV to the WiFi and says not able to connect to server. How do I fix this? 

Howdy everyone! Just replaced my providers Arris with this G34 (SBG00DAY34). I currently have Optimum service formally known as (suddenlink). I pay for the 500 Mbps Service, and with their modem everything was perfect! I always had at least no lower than a 450 Mbps download speed, I would even see 600 sometimes on wired connections. Now on this G34 all of my ethernet ports show a -200 dBm. I have three ethernet cords plugged in. They go to my TV, Xbox series X and desktop. The dBm levels on the WiFi are normal and the connection is perfect on both 5GHz and 2.4GHz. But again, the speeds are hardly acceptable. If I wasn’t paying for speeds I wasn't receiving I wouldn't mind. Everything seems to work okay which is strange to me, and the ping is low.  I can't figure out for the life of me what is causing the issue with the ethernet ports. If anyone can give me any sort of direction, I would greatly appreciate it. when it comes to technology and figuring things out, but I'm not very well ve

I bought an SBG8300 gateway a couple months ago, replacing an Xfinity rented gateway. Since then, I’ve had an issue where connecting my laptop to the wifi will cause the network to crash within about 30 seconds, sometimes faster. I have one desktop PC connected via ethernet, my phone is sometimes but not always connected and does not cause the crash, and there is a wifi printer which seems to have connection problems in general (I believe it may crash the network too, but it is hard to tell, since it disconnects at random - I believe this is an issue with the printer). My network is 400 mbps with Xfinity, and I had no issues while using their (rental) gateway. The laptop, a Samsung Galaxy Book 4 Edge which came out very recently and is new, will cause this crash consistently. After a few minutes, the network will be back up, and from there it will usually crash at least one more time, but not always. Depending on the day, the network will either crash repeatedly, or will start working

I have a 800 mbps service from xfinity. I get roughly 500 mbps wired and less that 100 mbps wireless.  I’m sitting 5 feet from the router unobstructed.  Doesn’t matter if it’s on the 2.4 or 5 channels. what are your thoughts? Thanks! 

I am setting up my new modem and the instructions refer me to the label on the modem for the network name and modem, but there is no label that contains this information.   What is the default network name and password for my new s34 modem?

WHY won’t my G34 connect to wifi

I have an unknown device showing on my surfboard app.   I've been throughout my home and can't find any other devices I haven't named in my surfboard.  I want to remove or block access to this device but I don't know how to do either of those things on my android phone app.  Can you please tell me how I'd go about blocking or deleting this device from my system? I have my 2 printersMy NEST  ThermostatSon's Play StationFirestickVIZIO TV and all other things that were connected to network on itROKU TV3 EVO FORCE1 boxes for televisionsMy phoneSon's phoneSon's laptopMy laptop Been through the house, no idea what this last thing could be.   Unplugged Alexa,  but apparently that is Bluetooth.  

I own my sbg8300 modem-router and use Mediacom. Recently it stopped working and I couldn't connect to the admin page, so I hardcoded my computer IP settings, connected to the router, and found that the ipv4 settings were all wrong. I reset them and the router worked for two weeks. Today they are messed up again and it won't save my changes. Right now the gateway is set to 120.74.103.183 and the subnet is 0.208.94.67. These are wrong, right? Is my firmware corrupted? How do I fix it?

The power went off and when it came back on the top and bottom lights are white instead of green.  I have unplugged the 3 plugs in back with no success. 

My T25 is supposed to accommodate up to 800 MBPS. Xfinity assures that they’re providing 1000 MBPS, but I get  only 400 MBPS. Please advise.

SVG2482AC - online light is blinking

Why would a brand new modem that advertises DOCSIS 3.1 show DOSIS 3.0 on the status pages? 

I’ve had an air surfboard mesh system for years.  I have 3 -W31 units. One is the router and the other 2 are satellites to extend signal. I have SB8200 modem. Looking to upgrade but curious if I can still use the W31s as satellites if I upgrade to G54. If so, is there a limit to the number of satellites I can connect? thx,cable

I have an Arris Surfboard SBG8300 where the password for the 2.4GHz network isn’t working with new devices. I can connect to the modem/router and the password for the 2.4GHz network is correct in the Admin portal. Devices that have been connected to this network are working fine, but when I try to connect a new device (Echo Dot) to the network, I get an invalid password error. I’ve verified the password in the admin panel is correct and I’ve entered the password several times into the Alexa app that connects the Echo Dot, but I still get the password error. I have many devices using the 2.4GHz network, and they are all working fine. The error only happens when I try connecting new devices.This doesn’t happen only on Amazon products. I only have this error on new devices that are limited to a 2.4GHz network. My only workaround is to use the 5GHz network. It’s using the same password as the 2.4GHz network, and I am 100% certain that I am entering the password correctly.I don’t want to re

I have bought a new Arris modem - do I need to do anything to remove any personal information on file?

i recent bought a Arris T25 cable modem pn 613587-003-00. The included power supply Ktec Ks051867 plug does not fit into the cable modem power input. I tried looking on the Arris support website for the model number of the ac adapter but could not find it. The ac adapter is 12V 2.5a so should work. Any help would be much appreciated.