G34 | G36

I am using my G34 router with Xfinity Comcast and my 5GHz network will periodically disappear. This has happened consistently since I purchased the router in June. It used to happen about once a day, but has recently been accelerating - I now need to reset the router every 4-5 hours. I originally resolved the problem by utilizing an outlet timer to manually cycle the power to the device once a day, resetting the channel. Given the frequency, however, this is no longer sufficient.What is a long term solution to ensuring resilient 5GHz access?

I got a new router, but I have received no instructions on how to set it up. 

My router is not working. I have tried resetting it and turning the router on/off. How can I fix this?

I only want to use the app to Rename my network and create a custom password other than the stock name and password that came with my G36

I am using my G34 router with Xfinity Comcast. From last few days, I’m only seeing 2.5 Ghz band in my devices, if i restart the router, the 5G band comes up, but it disappears after 2-3 hours. Any solution? I think 5G band gives me much better speed than 2.5 Ghz one.

My Arris-G34 has a solid orange light on the front it is usually green. No devices are able to pick my modem up. I have unplugged the devices and I have reset the device and nothing is working someone please help what is wrong with these Arris-G34 modems.

Hi I have a Arris G34 the light is orange and it's like they aren't any internet coming into my house. None of my devices will pick the modem up. I have tried unplugging and a 30-30-30 rest nothing works. I bought this back in May of 2023 what is wrong with my modem? Plz help!

Is there an actual User Manual for the G36 modem? If so, can someone provice a link to it?

Apparently Arris sent out a firmware update on November 1st 2023.  M ISP is Xfinity, and since this is my OWN gateway, Xfinity does not/cannot update the firmware.  It has to come directly from Arris.Since this “update”, I can no longer forward ports to enable access from outside my network.I did a RESET of the G34, but it doesn’t help.Below are the software versions BEFORE 11/01/2023 and AFTER 11/01/2023BEFORE 11/01/2023AFTER 11/01/2023RESETTING the G34 did not go back to the original version for some reason.Is there a way to get back to the WORKING version?Or is there a way to make the NEW version work correctly?

where to find the network security key 

My PC does not show network as available.Have:Done multiple resets modem/router Powered off PC Manually set up G36 name and SSID ipconfig Updated drivers Uninstalled/reinstalled drivers 7) Set up wifi hotspot with iphone-which connects no problem Set up ethernet directly to PC which works no problemIt simply does not recognize the DEVICE FOR WIFI

Is CommScope now the parent company and maker of the Arris Modems? 

After my G34 dropped the SSID for the 5G I had to reset it. It now will not allow me to change the password, so I had to change it on my computers.When I connect to the network now my Bitdefender alerts me that it is an unsafe network. I’m using the recommended WPA2/WPA3 security on the router.

I have Spectrum with their modem and separate router. I learned that if their service goes down my LAN does not function. Is that true with the G36? Also one poster said his download speed decreased significantly compared to the Spectrum modem.

G36 providing internet to laptops and phones. Not to Peloton, Nest or Alexa devices.

Hello - I recently replaced my Comcast gateway with an Arris G36 modem/router, as recommended by various people. I was able to hook it up and establish connectivity to all of the home devices. The G36 doesn’t seem to have the same reach as the Comcast equipment, but in effort to save some money on my monthly bills, I was willing to see it this move will be effective.The only real problem I have relates to the signal not reaching my detached garage/workshop (~30 yards from my house). In addition to the convenience of having a WiFi signal in this space, my garage doors are connected (via WiFi) to the “MyQ” interface, allowing me to open and close the doors, access diagnostics, etc. The G36 simply does not reach the receiver/s.So, I performed some research. I should say that I’m no longer a tech-savvy guy… the world of technology has proven to be much too fast for me these days! That said, I don’t think solving this problem should warrant a degree in networking ;) So, I p

I did a factory reset on my SBG00DAE36 & it is asking for me to set up a temporary Wi-Fi network. I scanned the QR code on the bottom of the device & it filled the SSID & the WiFi security key that is listed on the label. I click Submit & am told that WiFi is not enabled.  I have tried going to 192.168.0.1 on a PC connected to the modem & just get 'No Internet'.  I have verified through the Xfinity app that the modem is online per them.  At my wits end what to do.

Had several instances where my month old G34 drops my 5.0 band but 2.4 stays unaffected.  We’re on Xfinity.  Recycling the router reconnects both bands WiFi connection.  Any insight on how to prevent the dropping of 5.0?

Have G34 surfboard. Xfinity internet. Stream YouTube TV. When we got everything up and running it was great. Now the last month we are constantly losing internet.  Often just restarting the g34 fixes it. So how do I tell if it's the g34 or Xfinity who has the problem? 

I have a new G34.  I changed the network name, but when I try to change the password, the app thinks for a while and then goes back to the original password.  Am I doing something incorrectly?  Thanks.

My new Arris G36 is not showing my PC plugged into the 2.5 GB port in connected devices but connects to the internet; my devices connecting to my mesh network do show up in the connected devices page.I can see through my isp’s monitor page that the 2.5 GB port PC is getting an IP to itself on the 2.5 GB port. While the 1 GB port uses the 192.168.x.x ip the modem gives, the 2.5 GB port uses 212.164.x.x ip from the isp.The wan is pulling 146.115.x.x from the IP.In the advanced menu is Mac Bridging; it is not on but it says in Help that it is. “A bridged device will get an IP address directly from your internet provider and not have access to your local network."This sounds like what is happening. Arris Tech doesn't understand  and me had to do full resets, etc. Isp has no clue what I am talking about.Anyone know? 

Will not connect to network.  Orange flashing light.  Intermittent port fails preceding total failure.

Comcast Infiniti has come out to my home and verified that my G 36 is not functional I have verified that it has a warranty that expires in May 2024.  how do I get a replacement or a refund?

Last night some of our devices were disconnected from the internet. This morning only my laptop could connect. Restarted router and modem twice each. After restarting, nothing can connect. Xfinity had verified that everything is fine on their end. Network name won’t even show up as an option on any of our devices. 

Dear ladies and gentlemens,I please send me further instructions of how I can get a replacement for my current G34 modem.Background:I’ve recently called a Xfinity service engineer to figure out why my connections always slows down over  the day and finally ends up in an intermittent internet connection. This happened at least once every 24hrs. An investigation by your service team (case number 2308-02902) has already been done on this.The Xfinity service engineer changed the modem to the standard Xfinity modem and suddenly everything works fine.I assume that the Modem has a defect where the cache is not cleaned correctly. It is definitely not the connection to my apartment, because this has been checked several times and is now working fine.PS: the recent upgrade of the firmware made everything worse. Don’t know if it overwrites parts of the cache used for other things before, but it took me about an hour till the connection got established