Wi-Fi Modems

Only one of 20+ devices show online on the app

My G34 is flashing green. Reset didn’t work, and internet provider says it’s not getting a signal from my modem

Hello, I recently purchased an Arris G36 surfboard ax3000. Then I realized I wanted a mesh system in my house. My question: what is the most economical way to do this? Do I purchase two W31 mesh routers in addition to the arris g36? Do I still need the arris g36? Is there a better system to purchase? I have a couple kids and it seems like they are always on YouTube and iPads. We aren’t big gamers (yet). your help is greatly appreciated! Thank you!

So I've been with my cox representative for like 2 and half hours and we've been trying to get the modem/router up and running. The issue is that it isn't broadcasting a ssid, I bought it used and think it might have caused an issue there.

I’m locked out of my SBG7600AC2 due to too many incorrect login attempts. I never set a password, so I expected "password" to work, but it doesn't. I also tried a password from the Surfboard app, but that didn’t work either. I’ve already tried a factory reset, unplugged it for 10 minutes, and performed a 30-30-30 reset, but nothing seems to help. I think I might need to contact customer support to unlock it. Any tips before I do that?

I sent my router in weeks ago and have not heard anything. What’s the deal?

How do I create my network and password so that I can connect to the Internet?

Does Arris offer a range extender compatible with the SBG 8300 or G54 modem-routers?

For the last couple months (roughly 6 or so) my (refurbished) SBG8300 has been randomly rebooting. Sometimes it’s 2pm, sometimes it’s 10pm, on any given day. It’ll stay up for maybe 4-6 days and then all of the sudden reboot. I can confirm this is what’s happening because the uptime timer restarts. My internet will drop and then my router will have the solid blue light on the internet icon. The reboot takes 5-10 minutes to complete and then it’s back on like nothing ever happened. The device is already connected to a UPS and no other devices connected to it have ever had any power issues. My ISP is Xfinity (unfortunately no other options) and they’ve confirmed everything looks good on their end. We’ve done the whole song and dance of rebooting the signals and my router multiple times but it doesn’t change anything. I’ve been having this issue with this router for at least the last 6 months and have just been dealing with it since I’m no longer under warranty and unwilling to pay tech s

I recently installed an SBG3800. The Surfboard Web Manager only shows 9 connected devices; the Surfboard Central iOS app shows 0 connections. I can see all 12 connections on the Fing app. I have tried restarting the modem. Hardware Revision: 6 Software Image Name:AR01.02.078.04_092820_711.NCS.10 Firmware Version:01.02.078.04.NCS RDK-B-LLC:rdkb-20171127 SDK:7.1 Wi-Fi Driver:4.7.23.30.4.0

We just upgraded to an Arris G34 modem/router and now our Blink camera system won't connect. Keeps saying the password is wrong but it is 100% right. Ideas?

I finally got the ethernet working, but it’s not working properly when I have to utilize VPN. When activating VPN, connection no longer works properly. I went to web interface and advanced->ALG→ and all security features to pass through are selected.

Need help with activation. Modem is connected , app is downloaded

I tried configuring OpenDNS with my SBG7600AC2 gateway using the instructions provided. Under LAN settings, I checked the box to manually set the DNS addresses and them provided the primary and secondary DNS addresses for OpenDNS. The device restarted, I gave it plenty of time to take effect, etc. However, the test websites that OpenDNS is supposed to be filtering are not being filtered. My OpenDNS settings were working fine with the gateway that I owned previously (different brand/model).

I tried to changed my password on GUI web portal but it didn’t work now I’m locked out. I already tried unplugging the cord and plugged it back in.

I have Arris Motorola cable modem sbg 6580 and I need to change the password. I login using 192.168.0.1 USername: admin Password: motorola Unfortunately, it did not work. Has the user name and password changed? Any assistance is appreciated.

I got a new G36 cable modem to replace another. Connected to laptops fine, can’t connect to HP Envy 4500. Setup wizard cannot connect. Network test results say I need to add the MAC address of the printer to the list of permitted devices. How do I do that?

I was having connection issues on my Arris SBG8300 using 5G. I enabled band steering, and now the 5G channel doesn't even show up as an option.

For the price it has to offer 4x4 MIMO but the product page is awful. It doesn't even mention if it supports the 6Ghz frequency. There are Wi-Fi routers that support 2.4 and 5Ghz, and are Wi-Fi 7 so not having exact specifications specified on the product page does not make sense. The product page might as well just say “Here’s a modem. Give me money.” What justifies the price?

I bought the G34 to replace the old modem/router that I had because Xfinity assured me that was something wrong with it. Today I spent another 2 hours trying to fix the same issue, now with the G34, and had no luck. They say is an issue with the router so I’m here to see if there is any solution for this issue. Wifi Channel is NOT the issue. I went through many troubleshooting procedures and none of them work. My console is also having issues with the Nat-Type with both the routers I had.

I just bought my modem and router combo. Plugged it in and trying to set it up. I plug in my Ethernet cable and it turns green and so I know that it is getting power how ever my led lights on front never turned on. Is this one just defective or am I doing something wrong?

Ethernet is not updating to 1000mbps on web interface and reverts to 10. Tried cat5 and 6 wires. No difference and this is connected directly to port 1. Wifi is great but Ethernet is only at 90.

how to change wifi network name and password

is there a 3.1 modem/router combo for Xfinity digital voice service?

I’m trying to get out of a similar situation. I keep getting the wps disabled screen even though I’ve changed all the security. I don’t want to reset to factory because I’m afraid I’ll lose my xfinity connection. I really need to connect my canon ts 3522 printer to my new G34.